Hints about Plumbing/Gas Permits & More
If you seek clarification about plumbing and gas permits in the Central Alberta area, IJD Inspections Ltd. is here to help. You can browse our most frequently asked questions below or contact us for more direct assistance.
Plumbing & Gas Inspection Questions
Q. Do I need a plumbing permit?
A. Plumbing permits are required for installing, renewing or changing any plumbing equipment or plumbing system except replacement of a fixture, water heater, faucet, trap or valve, if there is no change in the piping system. For more information on permits, go to the Plumbing Permits page.
Q. Do I need a gas permit?
A. Gas permits are required to install, alter or make additions to any residential gas installation except replacement of a gas range, dryer or hot water tank, if there is no change made to the piping or venting. Commercial installations, alterations and appliance replacements always require a permit. For more information on permits, visit our Gas Permits page.
Q. Do I require a gas permit to replace a residential furnace?
A. Yes, if there are alterations to the venting or gas piping, then a permit is required.
Q. What are the minimum cover requirements for gas lines?
A. Minimum Cover Requirements
Note: Minimum cover means the distance between the top surface of the conductor, cable, raceway or conduit and the finished grade. 36” minimum cover is required for main service conductors ahead of the main breaker. Electrical and Gas lines can be run in the same trench.
If you’re seeking new single-family residential homeowner permits, learn when to call for inspections.
Search by city or town for regulated energy providers in your area.